全氟烷氧基 (PFA) NEOFLON PFA AP210-东莞市苏广塑胶原料有限公司

首页 > 产品展厅 > 铁氟龙/氟塑料 > 全氟烷氧基 (PFA) NEOFLON PFA...

全氟烷氧基 (PFA) NEOFLON PFA AP210

2023-10-19

产品详情

价格：450
产品名称全氟烷氧基 (PFA) NEOFLON PFA AP210 查看相似产品 >

简介

全氟烷氧基 (PFA) NEOFLON PFA AP210

物理性能	额定值	单位制	测试方法
密度 / 比重	2.14	g/cm3	ASTM D792
熔流率（熔体流动速率） (372°C/5.0 kg)	14	g/10 min	ASTM D3307

机械性能
额定值

单位制

测试方法

抗张强度
31.0

MPa
ASTM D1708

伸长率 (断裂)
420

%
ASTM D1708

热性能
额定值

单位制

测试方法

连续使用温度
260

°C

熔融温度
306

°C
DSC

NEOFLON PFA AP-210 is excellent in melt flowability and is suitable for injection molding and extrusion molding.

Introduction

AP-210 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.

Good melt flowability while maintaining excellent properties of PTFE. It can be melt-molded as a thermoplastic resin by injection molding and extrusion molding.

Excellent chemical resistance which is not affected by most of the chemicals.

Excellent heat resistance. Continuous use temperature is 260°C.

It retains flexibility without losing toughness under the environment from cryogenic to high temperature.

Low dielectric constant and dielectric loss tangent in a wide range of temperature and frequency.

It shows high electrical resistance and dielectric strength.

Nonflammable like POLYFLON PTFE and NEOFLON FEP.

Excellent weather resistance. No properties change even when exposed outside for a long time.

Non-stickiness. It shows excellent releasability and water repellency / oil repellency.

...

联系我们

东莞市苏广塑胶原料有限公司

联系人 李鸿
联系手机13922979590
联系电话0769-88768228
所在地址东莞市樟木头塑胶市场三期A199号

推荐产品

机械性能	额定值	单位制	测试方法
抗张强度	31.0	MPa	ASTM D1708
伸长率 (断裂)	420	%	ASTM D1708

热性能	额定值	单位制	测试方法
连续使用温度	260	°C
熔融温度	306	°C	DSC