低萃取物TOPAS 6013M-07
Product Description:
TOPAS 6013M-07 is an injection molding grade with a wide processing window, especially suited for blow molding processes including IBM and ISBM. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (130°C) heat distortion temperature to withstand 121°C steam sterilization protocols, as well as gamma and EtO procedures.
Selected Applications
-
Prefilled syringes, vials, cartridges
-
IV containers and components
-
Healthcare and food contact
Leading Attributes
-
Low leachables & extractables, low water transmission
-
Non-ionic, does not promote adsorption like glass
-
Chemically resistant to alcohol, acetone, and acrylates
-
Transparent, withstands EtO/gamma/steam sterilization
-
Temperature resistance, clarity and purity
-
Clarity, low birefringence, low moisture sensitivity
-
Low dielectric constant, thermoplastic
-
Not manufactured with BPA, phthalates, or halogens
-
Broad regulatory compliance
Related Grades for Injection Molding, Healthcare, Optics and Diagnostics
-
TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols
-
TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C)
-
TOPAS 5013L-10 - high flow grade; lubricated version for greater processing versatility
-
TOPAS 5013S-04 - high flow grade without lubricant
原料物性描述
(1)密度小，比PMMA和PC约低10%，有利于制品轻量化；
(2)饱和吸水率小，Arton吸水率远低于PMMA，不会产生因吸水导致物性下降的影响，Zeonex，Zeonor和Apel则几乎不吸水；
(3)由于含有极性和异向性小的单体，因而为非晶型透明材料，双折射率小；
(4)属高耐热性透明树脂玻璃化温度达140~170℃，玻璃化温度是非晶型聚合物的耐热性 指标；
(5)容易注射成型；
(6)机械性能优良，拉伸强度，弹性模量比PC高；
(7)优良的复制性，故制品质量高
(8)介电常数低，特别是高频性能好，是热塑性塑料中介电性能 的材料；
(9)耐擦伤性良好
COC的应用范围：
用途： 行业利用的主要性能应用零件食品机械包装机械食品卫生、自润滑、耐腐蚀、消音星形轮、蜗杆、导轨、齿轮、滑块、挡板、肉联厂面板、冲击板建筑机械耐磨、耐冲击、自润滑推土机推板衬里、挖土机铲头内衬、自卸车车厢内衬造纸机械耐磨、耐冲击箱罩密封、导轮、刮刀旋塞、刮水板、吸水箱面板、导流板水翼纺织机械耐冲击减震器挡板连接器、投梭器、打梭棒、缓冲块杆轴化工机械耐磨、耐腐蚀阀体、垫圈、填料、齿轮、螺栓、喷嘴、轴套传动机械、金属筛网垫板通用机械自润滑、耐磨、耐冲击管道、法兰、搅拌器叶片、机械设备的保护面矿山机械耐磨、耐冲击球磨机、叶轮、盖板、分切机衬里、滤板滑道车陶瓷工业自润滑、耐磨、耐冲击、不粘性汽车工业的传动装置、滑块座固定板、导轨、船舶船舱衬里、码头用防护板、中滚压头、滤泥板、托板.
Related Grades for Injection Molding, Healthcare, Optics and Diagnostics
-
TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM)
-
TOPAS 6015S-04 - high heat distortion resistance (150°C) for 134°C protocols
-
TOPAS IT X1 - impact grade for applications requiring extra toughness
...
产品展厅
