产品展厅
产品展厅
Healthcare 卫生保健/医疗，Sabic CYCOLAC ABS Healthcare 卫生保健/医疗系列塑胶原料，及物性参数
Superior flow, injection molding ABS for medical applications. Good IMPACT. For thin-wall applications. Biocompatible (ISO10993). FDA compliant. Gamma & EtO sterilizable.
相关色号：HMG94MD-8H6D011、HMG94MD-7H2D321、HMG94MD-4H7D134、HMG94MD-8H9D414、HMG94MD-7H4D043、HMG94MD-8H8D299、HMG94MD-7H1D504、HMG94MD-5H3D013、HMG94MD-5H6D136
| TYPICAL PROPERTIES (1) | |||
MECHANICAL机械性能 | Value | Unit | Standard |
Tensile Stress, yld, Type I, 5 mm/min / 抗张程度,屈服,类型I,5 mm/min | 46 | MPa | ASTM D 638 |
Tensile Stress, brk, Type I, 5 mm/min / 抗张程度,断裂,类型I,5 mm/min | 35 | MPa | ASTM D 638 |
Tensile Strain, yld, Type I, 5 mm/min / 拉伸伸长,屈服,类型I,5 mm/min | 2 | % | ASTM D 638 |
Tensile Strain, brk, Type I, 5 mm/min / 拉伸伸长,断裂,类型I,5 mm/min | 18 | % | ASTM D 638 |
Tensile Modulus, 5 mm/min / 拉伸模量,5 mm/min | 2480 | MPa | ASTM D 638 |
Flexural Stress, yld, 1.3 mm/min, 50 mm span / 挠曲强度, 屈服, 1.3 mm/min, 50 mm 跨距 | 79 | MPa | ASTM D 790 |
Flexural Modulus, 1.3 mm/min, 50 mm span / 挠曲模量, 1.3 mm/min, 50 mm 跨距 | 2620 | MPa | ASTM D 790 |
IMPACT | Value | Unit | Standard |
Izod Impact, notched, 23°C / 悬臂梁缺口冲击强度23°C | 240 | J/m | ASTM D 256 |
Instrumented Impact Total Energy, 23°C / 仪表控制抗冲击总能量，23°C | 21 | J | ASTM D 3763 |
THERMAL | Value | Unit | Standard |
Vicat Softening Temp, Rate B/50 / 维卡软化温度 B级/50 | 98 | °C | ASTM D 1525 |
HDT, 0.45 MPa, 3.2 mm, unannealed / 热变形温度,0.45 MPa, 3.2 mm,未退火 | 95 | °C | ASTM D 648 |
HDT, 1.82 MPa, 3.2mm, unannealed / 热变形温度,1.82 MPa, 3.2mm,未退火 | 82 | °C | ASTM D 648 |
CTE, -40°C to 40°C, flow / 线形膨胀系数,-40°C 到40°C,流动 | 8.82E-05 | 1/°C | ASTM E 831 |
CTE, -40°C to 40°C, xflow / 线形膨胀系数,-40°C 到40°C,横向 | 8.46E-05 | 1/°C | ASTM E 831 |
Relative Temp Index, Elec / 相对热指数， 电性能 | 60 | °C | UL 746B |
Relative Temp Index, Mech w/impact / 相对热指数，机械冲击性能 | 60 | °C | UL 746B |
Relative Temp Index, Mech w/o impact / 相对热指数，非机械冲击性能 | 60 | °C | UL 746B |
PHYSICAL | Value | Unit | Standard |
Specific Gravity/比重 | 1.04 | – | ASTM D 792 |
Mold Shrinkage, flow, 3.2 mm / 模塑收缩量，流动，3.2 mm | 0.5 – 0.8 | % | SABIC Method |
Melt Flow Rate / 熔流率, 230°C/3.8 kgf | 11.7 | g/10 min | ASTM D 1238 |
Melt Viscosity, 240°C, 1000 sec-1 | 1720 | poise | ASTM D 3825 |
Melt Flow Rate / 熔流率, 220°C/5.0 kg | 12 | g/10 min | ISO 1133 |
FLAME CHARACTERISTICS 火焰特性 | Value | Unit | Standard |
UL Recognized, 94HB Flame Class Rating (3) / UL认可，94HB 阻燃等级(3) | 1.52 | mm | UL 94 |
Source GMD, last updated:12/10/2001 |
Processing |
| Parameter | ||
Injection Molding | Value | Unit |
Drying Temperature / 干燥温度 | 80 – 90 | °C |
Drying Time / 干燥时间 | 2 – 4 | hrs |
Drying Time (Cumulative) / 干燥时间（累积的） | 8 | hrs |
Maximum Moisture Content / *含湿量 | 0.01 | % |
Melt Temperature / 熔体温度 | 205 – 245 | °C |
Nozzle Temperature / 注嘴温度 | 205 – 245 | °C |
Front – Zone 3 Temperature / 前区3温度 | 205 – 225 | °C |
Middle – Zone 2 Temperature / 中区2温度 | 200 – 210 | °C |
Rear – Zone 1 Temperature / 后区1温度 | 190 – 200 | °C |
Mold Temperature / 模具温度 | 50 – 70 | °C |
Back Pressure / 背压 | 0.3 – 0.7 | MPa |
Screw Speed / 螺杆速度 | 30 – 60 | rpm |
Shot to Cylinder Size / 每次注射量占料筒熔胶总量的百分比 | 50 – 70 | % |
Vent Depth / 排气孔深度 | 0.038 – 0.051 | mm |
