产品展厅
产品展厅
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 物理性能 | 密度 | ISO1183 | 1.54 | g/cm3 | |
| 收缩率 | 垂直流动方向 | ISO294-4 | 1.2 | % | |
| 流动方向 | ISO294-4 | 0.70 | % | ||
| 吸水率 | 23°C,24hr,2.00mm | ISO62 | 0.35 | % | |
| 平衡,23°C,2.00mm,50%RH | ISO62 | 0.15 | % | ||
| 机械性能 | 拉伸模量 | ISO527-2 | 3900 | MPa | |
| 拉伸应力(断裂) | ISO527-2 | 70.0 | MPa | ||
| 拉伸应变(断裂) | ISO527-2 | 4.7 | % | ||
| 拉伸蠕变模量 | 1hr | ISO899-1 | 3000 | MPa | |
| 1000hr | ISO899-1 | 2000 | MPa | ||
| 冲击性能 | 简支梁缺口冲击强度 | -30°C | ISO179/1eA | 5.0 | kJ/m2 |
| 23°C | ISO179/1eA | 8.5 | kJ/m2 | ||
| 简支梁无缺口冲击强度 | -30°C | ISO179/1eU | 40 | kJ/m2 | |
| 23°C | ISO179/1eU | 46 | kJ/m2 | ||
| 热性能 | 1.8MPa,未退火 | ISO75-2/A | 170 | °C | |
| 8.0MPa,未退火 | ISO75-2/C | 66.0 | °C | ||
| 维卡软化温度 | ISO306/B50 | 180 | °C | ||
| 熔融温度1 | ISO11357-3 | 205 | °C | ||
| 电气性能 | 表面电阻率 | IEC60093 | 1.0E+14 | ohms | |
| 体积电阻率 | IEC60093 | >1.0E+15 | ohms·cm | ||
| 介电强度 | IEC60243-1 | 27 | kV/mm | ||
| 相对电容率 | 100Hz | IEC60250 | 4.00 | ||
| 1MHz | IEC60250 | 3.80 | |||
| 耗散因数 | 100Hz | IEC60250 | 0.010 | ||
| 1MHz | IEC60250 | 0.018 | |||
| 漏电起痕指数 | IEC60112 | 250 | V | ||
| 可燃性 | 可燃性等级 | 0.750mm | IEC60695-11-10,-20 | V-0 | |
| 1.50mm | IEC60695-11-10,-20 | V-0 | |||
| 极限氧指数 | ISO4589-2 | 30 | % | ||
| 可燃性等级 | 0.750mm | IEC60695-11-10,-20 | V-0 | ||
| 1.50mm | IEC60695-11-10,-20 | V-0 | |||
| 极限氧指数 | ISO4589-2 | 30 | % | ||
| 充模分析 | 熔体密度 | 1.31 | g/cm3 | ||
| 熔体粘度(250°C,1000sec^-1) | ISO11443 | 240 | Pa·s | ||
| SpecificHeatCapacityofMelt | 1970 | J/kg/°C | |||
| ThermalConductivityofMelt | 0.23 | W/m/K | |||
| Crastin PBT树脂具备充分的机械强度、热抵抗性、耐摩擦及磨损性、干净的表面及优秀的着色性等性质。此外，还具备相当优秀的电绝缘特性及很高的Arc-Resistance Grade。由于流动特性好，所以可以大幅减少生产时的生产Cycle-Time等。容易进行Welding、Fastening以及Glueing，还可进行Printing、Painting、Hot Stamping及Laser Marking等作业。 | |||||
| Crastin种类及用途 | |||||
| 产品分类 | Grade | Base | 增强剂 | ||
| 非阻燃 | 非增强 | 挤压用 | 6129 | PBT | |
| 标准注塑用 | S600F10 | PBT | |||
| 高流动 | S620F20 | PBT | |||
| 耐冲击 | ST820 | PBT | |||
| GF增强 | 标准 | SK601 | PBT | GF 10% | |
| SK602 | PBT | GF 15% | |||
| SK603 | PBT | GF 20% | |||
| SK605 | PBT | GF 30% | |||
| SK608 | PBT | GF 45% | |||
| SK609 | PBT | GF 50% | |||
| 尺寸稳定 | LW9020 | PBT | GF 20% | ||
| LW9030 | Alloy | GF 30% | |||
| 耐冲击 | LW9330 | PBT Alloy | GF 30% | ||
| 阻燃 | 非增强 | 标准 | HR5315HFS | PBT | |
| 耐冲击 | ST830FRUV | PBT | |||
| GF增强 | 标准 | SK642FR | PBT | GF 15% | |
| SK645FR | PBT | GF 30% | |||
| 尺寸稳定 | LW9020FR | PBT | GF 20% | ||
| LW9030FR | PBT | GF 30% | |||
| 耐冲击 | T841FR1 NC | Alloy | GF 10% | ||
| T843FR | PBT | GF 20% | |||
| T845FR | Alloy | GF 30% | |||
