产品展厅
产品展厅
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 物理性能 | 密度 | ISO1183 | 1.68 | g/cm3 | |
| 收缩率 | 横向流量 | ISO294-4 | 0.80 | % | |
| 流量 | ISO294-4 | 0.20 | % | ||
| 机械性能 | 拉伸模量 | ISO527-2 | 11300 | MPa | |
| 拉伸应力(断裂) | ISO527-2 | 130 | MPa | ||
| 拉伸应变(断裂) | ISO527-2 | 1.9 | % | ||
| 弯曲模量 | ISO178 | 10500 | MPa | ||
| 弯曲应力 | ISO178 | 200 | MPa | ||
| 冲击性能 | 简支梁缺口冲击强度 | -40°C | ISO179/1eA | 8.0 | kJ/m2 |
| 23°C | ISO179/1eA | 9.0 | kJ/m2 | ||
| 简支梁无缺口冲击强度 | -40°C | ISO179/1eU | 30 | kJ/m2 | |
| 23°C | ISO179/1eU | 40 | kJ/m2 | ||
| 热性能 | 热变形温度(0.45MPa,未退火) | ISO75-2/B | 243 | °C | |
| 热变形温度(1.8MPa,未退火) | ISO75-2/A | 220 | °C | ||
| 熔融温度2 | ISO11357-3 | 252 | °C | ||
| 线形热膨胀系数-流动 | -- | ISO11359-2 | 1.4E-5 | cm/cm/°C | |
| -40to23°C | ISO11359-2 | 2.0E-5 | cm/cm/°C | ||
| 线形热膨胀系数-横向 | -- | ISO11359-2 | 9.0E-5 | cm/cm/°C | |
| -40to23°C | ISO11359-2 | 7.3E-5 | cm/cm/°C | ||
| RTIElec | 0.40mm | UL746 | 155 | °C | |
| 0.75mm | UL746 | 155 | °C | ||
| 1.5mm | UL746 | 155 | °C | ||
| 3.0mm | UL746 | 155 | °C | ||
| RTIImp | 0.40mm | UL746 | 155 | °C | |
| 0.75mm | UL746 | 155 | °C | ||
| 1.5mm | UL746 | 155 | °C | ||
| 3.0mm | UL746 | 155 | °C | ||
| RTIStr | 0.40mm | UL746 | 155 | °C | |
| 0.75mm | UL746 | 155 | °C | ||
| 1.5mm | UL746 | 155 | °C | ||
| 3.0mm | UL746 | 155 | °C | ||
| 电气性能 | 表面电阻率 | IEC60093 | 1.0E+14 | ohms | |
| 体积电阻率 | IEC60093 | >1.0E+15 | ohms·cm | ||
| 相对电容率 | 100Hz | IEC60250 | 4.10 | ||
| 1MHz | IEC60250 | 3.70 | |||
| 耗散因数 | 100Hz | IEC60250 | 0.031 | ||
| 1MHz | IEC60250 | 0.013 | |||
| 相比耐漏电起痕指数(CTI) | UL746 | PLC2 | |||
| 漏电起痕指数 | IEC60112 | 200 | V | ||
| 可燃性 | UL阻燃等级 | 0.35mm | UL94 | V-0 | |
| 1.5mm | UL94 | V-05VA | |||
| FlammabilityClassification | 0.35mm | IEC60695-11-10,-20 | V-0 | ||
| 1.5mm | IEC60695-11-10,-20 | V-05VA | |||
| 极限氧指数 | ISO4589-2 | 33 | % | ||
| FMVSS可燃性 | FMVSS302 | DNI | |||
| FILL ANALYSIS | 充模分析 | TestMethod | NominalValue | Unit | |
| 顶出温度 | 170 | °C | |||
| Crastin PBT树脂具备充分的机械强度、热抵抗性、耐摩擦及磨损性、干净的表面及优秀的着色性等性质。此外，还具备相当优秀的电绝缘特性及很高的Arc-Resistance Grade。由于流动特性好，所以可以大幅减少生产时的生产Cycle-Time等。容易进行Welding、Fastening以及Glueing，还可进行Printing、Painting、Hot Stamping及Laser Marking等作业。 | |||||
| Crastin种类及用途 | |||||
| 产品分类 | Grade | Base | 增强剂 | ||
| 非阻燃 | 非增强 | 挤压用 | 6129 | PBT | |
| 标准注塑用 | S600F10 | PBT | |||
| 高流动 | S620F20 | PBT | |||
| 耐冲击 | ST820 | PBT | |||
| GF增强 | 标准 | SK601 | PBT | GF 10% | |
| SK602 | PBT | GF 15% | |||
| SK603 | PBT | GF 20% | |||
| SK605 | PBT | GF 30% | |||
| SK608 | PBT | GF 45% | |||
| SK609 | PBT | GF 50% | |||
| 尺寸稳定 | LW9020 | PBT | GF 20% | ||
| LW9030 | Alloy | GF 30% | |||
| 耐冲击 | LW9330 | PBT Alloy | GF 30% | ||
| 阻燃 | 非增强 | 标准 | HR5315HFS | PBT | |
| 耐冲击 | ST830FRUV | PBT | |||
| GF增强 | 标准 | SK642FR | PBT | GF 15% | |
| SK645FR | PBT | GF 30% | |||
| 尺寸稳定 | LW9020FR | PBT | GF 20% | ||
| LW9030FR | PBT | GF 30% | |||
| 耐冲击 | T841FR1 NC | Alloy | GF 10% | ||
| T843FR | PBT | GF 20% | |||
| T845FR | Alloy | GF 30% | |||
