产品展厅
产品展厅
技术参数
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 物理性能 | 密度 | ISO1183 | 1.31 | g/cm3 | |
| 熔流率（熔体流动速率）(250°C/2.16kg) | ISO1133 | 19 | g/10min | ||
| 收缩率 | 横向流量 | ISO294-4 | 1.6 | % | |
| 流量 | ISO294-4 | 1.7 | % | ||
| WaterAbsorption(Saturation,23°C,2.00mm) | ISO62 | 0.40 | % | ||
| WaterAbsorption(Equilibrium,23°C,2.00mm,50%RH) | ISO62 | 0.20 | % | ||
| 粘数 | ISO307 | 130 | cm3/g | ||
| 机械性能 | 拉伸模量 | ISO527-2 | 2500 | MPa | |
| 拉伸应力(屈服) | ISO527-2 | 58.0 | MPa | ||
| 拉伸应变(屈服) | ISO527-2 | 5.0 | % | ||
| 标称拉伸断裂应变 | ISO527-2 | 40 | % | ||
| TensileCreepModulus(1hr) | ISO899-1 | 2600 | MPa | ||
| 拉伸蠕变模量(1000hr) | ISO899-1 | 1800 | MPa | ||
| 弯曲模量 | ISO178 | 2200 | MPa | ||
| 弯曲应力 | ISO178 | 85.0 | MPa | ||
| 冲击性能 | 简支梁缺口冲击强度 | -30°C | ISO179/1eA | 4.0 | kJ/m2 |
| 23°C | ISO179/1eA | 5.0 | kJ/m2 | ||
| 简支梁无缺口冲击强度 | -30°C | ISO179/1eU | NoBreak | ||
| 23°C | ISO179/1eU | NoBreak | |||
| 悬壁梁缺口冲击强度(23°C) | ISO180/1A | 4.5 | kJ/m2 | ||
| 无缺口伊佐德冲击强度(23°C) | ISO180/1U | NoBreak | |||
| 热性能 | 热变形温度(0.45MPa,未退火) | ISO75-2/B | 115 | °C | |
| 热变形温度(0.45MPa,退火) | ISO75-2/B | 180 | °C | ||
| 热变形温度(1.8MPa,未退火) | ISO75-2/A | 50.0 | °C | ||
| 热变形温度(1.8MPa,退火) | ISO75-2/A | 60.0 | °C | ||
| 玻璃转化温度2 | ISO11357-2 | 55.0 | °C | ||
| 维卡软化温度 | ISO306/B50 | 175 | °C | ||
| 熔融温度2 | ISO11357-3 | 225 | °C | ||
| PeakCrystallizationTemperature2 | ISO11357-3 | 192 | °C | ||
| 线形热膨胀系数-流动 | -- | ISO11359-2 | 1.1E-4 | cm/cm/°C | |
| -40to23°C | ISO11359-2 | 8.0E-5 | cm/cm/°C | ||
| 55to160°C | ISO11359-2 | 1.9E-4 | cm/cm/°C | ||
| 线形热膨胀系数-横向 | -- | ISO11359-2 | 1.2E-4 | cm/cm/°C | |
| -40to23°C | ISO11359-2 | 9.0E-5 | cm/cm/°C | ||
| 55to160°C | ISO11359-2 | 2.0E-4 | cm/cm/°C | ||
| 电气性能 | 表面电阻率 | IEC60093 | 1.0E+12 | ohms | |
| 体积电阻率 | IEC60093 | >1.0E+15 | ohms·cm | ||
| 介电强度 | IEC60243-1 | 26 | kV/mm | ||
| 相对电容率 | 100Hz | IEC60250 | 3.60 | ||
| 1MHz | IEC60250 | 3.20 | |||
| 耗散因数 | 100Hz | IEC60250 | 7.9E-4 | ||
| 1MHz | IEC60250 | 0.020 | |||
| 漏电起痕指数 | IEC60112 | 400 | V | ||
| 可燃性 | UL阻燃等级 | 0.75mm | UL94 | HB | |
| 1.5mm | UL94 | HB | |||
| FlammabilityClassification | 0.75mm | IEC60695-11-10,-20 | HB | ||
| 1.5mm | IEC60695-11-10,-20 | HB | |||
| 极限氧指数 | ISO4589-2 | 22 | % | ||
| FMVSS可燃性 | FMVSS302 | SE | |||
| Fogging-G-value(condensate) | ISO6452 | 0.0 | g | ||
| FILL ANALYSIS | 充模分析 | TestMethod | NominalValue | Unit | |
| MeltDensity | 1.11 | g/cm3 | |||
| 顶出温度 | 170 | °C | |||
| SpecificHeatCapacityofMelt | 2110 | J/kg/°C | |||
| ThermalConductivityofMelt | 0.21 | W/m/K | |||
| ADDITIONAL INFORMATION | 补充信息 | TestMethod | NominalValue | Unit | |
| Odor3 | VDA270 | 3.00 | |||
| ThermalDesorptionAnalysisofOrganicEmissions4 | VDA278 | 1.00 | μg/g | ||
