产品展厅
产品展厅
| 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | ||
| 物理性能 | 密度 | ISO1183 | 1.44 | g/cm3 | |
| 溶化体积流率（MVR）(250°C/5.0kg) | ISO1133 | 10.0 | cm3/10min | ||
| 收缩率 | 横向流量 | ISO294-4 | 0.70 | % | |
| AcrossFlow:80°C,48hr | ISO294-4 | 0.20 | % | ||
| 流量 | ISO294-4 | 0.20 | % | ||
| Flow:80°C,48hr | ISO294-4 | 0.15 | % | ||
| WaterAbsorption(Saturation,23°C,2.00mm) | ISO62 | 0.72 | % | ||
| WaterAbsorption(Equilibrium,23°C,2.00mm,50%RH) | ISO62 | 0.24 | % | ||
| 机械性能 | 拉伸模量 | ISO527-2 | 9500 | MPa | |
| 拉伸应力(断裂) | ISO527-2 | 130 | MPa | ||
| 拉伸应变(断裂) | ISO527-2 | 2.5 | % | ||
| TensileCreepModulus(1hr) | ISO899-1 | 9000 | MPa | ||
| 拉伸蠕变模量(1000hr) | ISO899-1 | 7300 | MPa | ||
| 弯曲模量 | ISO178 | 8500 | MPa | ||
| 弯曲应力 | ISO178 | 190 | MPa | ||
| 冲击性能 | 简支梁缺口冲击强度 | -30°C | ISO179/1eA | 9.0 | kJ/m2 |
| 23°C | ISO179/1eA | 10 | kJ/m2 | ||
| 简支梁无缺口冲击强度 | -30°C | ISO179/1eU | 65 | kJ/m2 | |
| 23°C | ISO179/1eU | 60 | kJ/m2 | ||
| 悬壁梁缺口冲击强度 | -30°C | ISO180/1A | 8.0 | kJ/m2 | |
| 23°C | ISO180/1A | 8.0 | kJ/m2 | ||
| 无缺口伊佐德冲击强度 | -30°C | ISO180/1U | 50 | kJ/m2 | |
| 23°C | ISO180/1U | 50 | kJ/m2 | ||
| 热性能 | 热变形温度(0.45MPa,未退火) | ISO75-2/B | 215 | °C | |
| 热变形温度(1.8MPa,未退火) | ISO75-2/A | 170 | °C | ||
| 玻璃转化温度2 | ISO11357-2 | 120 | °C | ||
| 维卡软化温度 | ISO306/B50 | 150 | °C | ||
| 熔融温度2 | ISO11357-3 | 225 | °C | ||
| 线形热膨胀系数-流动 | ISO11359-2 | 2.5E-5 | cm/cm/°C | ||
| 线形热膨胀系数-横向 | ISO11359-2 | 1.0E-4 | cm/cm/°C | ||
| 电气性能 | 表面电阻率 | IEC60093 | 1.0E+14 | ohms | |
| 体积电阻率 | IEC60093 | >1.0E+15 | ohms·cm | ||
| 介电强度 | IEC60243-1 | 36 | kV/mm | ||
| 相对电容率 | 100Hz | IEC60250 | 3.90 | ||
| 1MHz | IEC60250 | 3.60 | |||
| 耗散因数 | 100Hz | IEC60250 | 2.4E-3 | ||
| 1MHz | IEC60250 | 0.017 | |||
| 漏电起痕指数 | IEC60112 | 425 | V | ||
| 可燃性 | BurningRate3(1.00mm) | ISO3795 | 42 | mm/min | |
| UL阻燃等级 | 1.5mm | UL94 | HB | ||
| 3.0mm | UL94 | HB | |||
| FlammabilityClassification | 1.5mm | IEC60695-11-10,-20 | HB | ||
| 3.0mm | IEC60695-11-10,-20 | HB | |||
| 极限氧指数 | ISO4589-2 | 19 | % | ||
| FMVSS可燃性 | FMVSS302 | B | |||
| FILL ANALYSIS | 充模分析 | TestMethod | NominalValue | Unit | |
| MeltDensity | 1.28 | g/cm3 | |||
| 顶出温度 | 170 | °C | |||
| SpecificHeatCapacityofMelt | 1900 | J/kg/°C | |||
| ThermalConductivityofMelt | 0.26 | W/m/K | |||
| ADDITIONAL INFORMATION | 补充信息 | TestMethod | NominalValue | Unit | |
| EmissionofOrganicCompounds | VDA277 | 90.0 | μgC/g | ||
