产品展厅
产品展厅
技术参数
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 物理性能 | -- | ASTMD792 | 1.16到1.24 | g/cm3 | |
| 23°C | ISO1183 | 1.17到1.34 | g/cm3 | ||
| 表观密度 | ISO60 | 0.65到0.80 | g/cm3 | ||
| 熔流率（熔体流动速率）(250°C/5.0kg) | ASTMD1238 | 8.7到20 | g/10min | ||
| 溶化体积流率（MVR）(250°C/5.0kg) | ISO1133 | 7.00到13.3 | cm3/10min | ||
| 流动:23°C | ASTMD955 | 0.29到1.3 | % | ||
| 横向流动:23°C | ASTMD955 | 0.60到1.7 | % | ||
| 23°C | ISO294-4 | 0.79到1.5 | % | ||
| 23°C,24hr | ASTMD570 | 0.042到0.21 | % | ||
| ISO62 | 0.080到0.50 | % | |||
| 饱和,23°C | ISO62 | 0.071到0.50 | % | ||
| 平衡,23°C,50%RH | ISO62 | 0.046到0.21 | % | ||
| 硬度 | 洛氏硬度(23°C) | ASTMD785 | 89到117 | ||
| 球压硬度 | ISO2039-1 | 81.8到108 | MPa | ||
| 机械性能 | 23°C | ASTMD638 | 1810到2250 | MPa | |
| ISO527-2 | 1880到2220 | MPa | |||
| 屈服,23°C | ASTMD638 | 43.5到66.4 | MPa | ||
| ISO527-2 | 44.0到60.5 | MPa | |||
| 断裂,23°C | ASTMD638 | 40.3到61.2 | MPa | ||
| ISO527-2 | 39.6到60.6 | MPa | |||
| 23°C | ASTMD638 | 47.7到60.5 | MPa | ||
| 屈服,23°C | ASTMD638 | 3.7到7.6 | % | ||
| ISO527-2 | 3.3到5.1 | % | |||
| 断裂,23°C | ASTMD638 | 1.5到150 | % | ||
| ISO527-2 | 18到150 | % | |||
| 标称拉伸断裂应变(23°C) | ISO527-2 | 10到51 | % | ||
| 23°C | ASTMD790 | 1450到2430 | MPa | ||
| ISO178 | 1880到2510 | MPa | |||
| ASTMD790 | 66.9到91.4 | MPa | |||
| ISO178 | 64.3到95.0 | MPa | |||
| 屈服,23°C | ASTMD790 | 66.7到102 | MPa | ||
| 断裂,23°C | ASTMD790 | 69.0到83.3 | MPa | ||
| 泰伯耐磨性(23°C) | ASTMD1044 | 30.0到30.6 | mg | ||
| 冲击性能 | 简支梁缺口冲击强度(23°C) | ISO179 | 19到61 | kJ/m2 | |
| 23°C | ASTMD256 | 38到820 | J/m | ||
| ISO180 | 30到65 | kJ/m2 | |||
| ASTMD3763 | 48.6到71.1 | J | |||
| ISO6603-2 | 45.0到110 | J | |||
| 热性能 | 0.45MPa,未退火 | ASTMD648 | 87.5到245 | °C | |
| ISO75-2/B | 90.0到125 | °C | |||
| 1.8MPa,未退火 | ASTMD648 | 72.8到107 | °C | ||
| ISO75-2/A | 73.6到90.5 | °C | |||
| -- | ASTMD1525 | 117到136 | °C | ||
| ISO306 | 114到136 | °C | |||
| ISO11357-3 | 225 | °C | |||
| ASTMD3418 | 225到226 | °C | |||
| 流动 | ASTMD696 | 1.5E-5到6.5E-5 | cm/cm/°C | ||
| ASTME831 | 7.9E-5到9.1E-5 | cm/cm/°C | |||
| ISO11359-2 | 8.1E-5到9.1E-5 | cm/cm/°C | |||
| 横向 | ASTME831 | 7.5E-5到1.1E-4 | cm/cm/°C | ||
| ISO11359-2 | 9.0E-5到1.1E-4 | cm/cm/°C | |||
| 导热系数(23°C) | ISO8302 | 0.18到0.20 | W/m/K | ||
| RTIElec | UL746 | 74.0到130 | °C | ||
| RTIImp | UL746 | 74.0到130 | °C | ||
| RTI | UL746 | 74.0到140 | °C | ||
| 电气性能 | 表面电阻率 | IEC60093 | 5.5E+10到1.0E+17 | ohms | |
| 23°C | ASTMD257 | 1.0E+13到1.0E+18 | ohms·cm | ||
| IEC60093 | 1.0E+14到2.5E+17 | ohms·cm | |||
| ASTMD149 | 18到25 | kV/mm | |||
| IEC60243-1 | 17到30 | kV/mm | |||
| ASTMD150 | 3.00到3.20 | ||||
| IEC60250 | 3.19 | ||||
| 耗散因数(23°C) | IEC60250 | 1.9E-3到0.020 | |||
| 耐电弧性 | ASTMD495 | 82.5到131 | sec | ||
| 漏电起痕指数 | IEC60112 | 113到600 | V | ||
| 可燃性 | 灼热丝易燃指数 | IEC60695-2-12 | 650到960 | °C | |
| 热灯丝点火温度 | IEC60695-2-13 | 720到828 | °C | ||
| 充模分析 | 熔体粘度 | ASTMD3835 | 210到261 | Pa·s | |
