产品展厅
产品展厅
技术参数
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 物理性能 | 密度(23°C) | ISO1183 | 1.52 | g/cm3 | |
| 溶化体积流率（MVR）(260°C/5.0kg) | ISO1133 | 40.0 | cm3/10min | ||
| 收缩率 | 横向流量:260°C,2.00mm2 | ISO294-4 | 1.2 | % | |
| AcrossFlow:120°C,2hr,2.00mm3 | ISO294-4 | 0.10 | % | ||
| 流量:260°C,2.00mm2 | ISO294-4 | 0.50 | % | ||
| Flow:120°C,2hr,2.00mm3 | ISO294-4 | 0.10 | % | ||
| 机械性能 | 拉伸模量(23°C) | ISO527-2/1 | 10500 | MPa | |
| 拉伸应力(断裂,23°C) | ISO527-2/5 | 100 | MPa | ||
| 拉伸应变(断裂,23°C) | ISO527-2/5 | 2.2 | % | ||
| 弯曲模量4(23°C) | ISO178/A | 10000 | MPa | ||
| 弯曲应力4(23°C) | ISO178 | 165 | MPa | ||
| FlexuralStrainatFlexuralStrength5(23°C) | 2.4 | % | |||
| 冲击性能 | 简支梁无缺口冲击强度 | -30°C | ISO179/1eU | 35 | kJ/m2 |
| 23°C | ISO179/1eU | 40 | kJ/m2 | ||
| 无缺口伊佐德冲击强度 | -30°C | ISO180/1U | 33 | kJ/m2 | |
| 23°C | ISO180/1U | 36 | kJ/m2 | ||
| 热性能 | 热变形温度(0.45MPa,未退火) | ISO75-2/B | 224 | °C | |
| 热变形温度(1.8MPa,未退火) | ISO75-2/A | 210 | °C | ||
| 维卡软化温度 | ISO306/B50 | 206 | °C | ||
| BallPressureTest(214°C) | IEC60695-10-2 | Pass | |||
| 熔融温度5 | ISO11357-3 | 220 | °C | ||
| 线形热膨胀系数-流动(23到55°C) | ISO11359-2 | 3.0E-5 | cm/cm/°C | ||
| CLTE-Transverse(23to55°C) | ISO11359-2 | 9.0E-5 | cm/cm/°C | ||
| 电气性能 | 表面电阻率 | IEC60093 | 2.0E+16 | ohms | |
| 体积电阻率(23°C) | IEC60093 | 2.3E+16 | ohms·cm | ||
| 介电强度(23°C,1.00mm) | IEC60243-1 | 35 | kV/mm | ||
| 相比耐漏电起痕指数(CTI) | UL746 | PLC0 | |||
| 可燃性 | UL阻燃等级 | 0.40mm | UL94 | V-0 | |
| 0.75mm | UL94 | V-0 | |||
| 1.5mm | UL94 | V-05VA | |||
| 3.0mm | UL94 | V-0 | |||
| 灼热丝易燃指数 | 0.40mm | IEC60695-2-12 | 960 | °C | |
| 0.75mm | IEC60695-2-12 | 960 | °C | ||
| 1.5mm | IEC60695-2-12 | 960 | °C | ||
| 3.0mm | IEC60695-2-12 | 960 | °C | ||
| 热灯丝点火温度 | 0.40mm | IEC60695-2-13 | 850 | °C | |
| 0.75mm | IEC60695-2-13 | 775 | °C | ||
| 1.5mm | IEC60695-2-13 | 825 | °C | ||
| 3.0mm | IEC60695-2-13 | 850 | °C | ||
| 极限氧指数7 | ISO4589-2 | 44 | % | ||
| ADDITIONAL INFORMATION | 补充信息 | TestMethod | NominalValue | Unit | |
| ISOShortname | ISO7792 | PBT,GFHMR,09-110,GF25;ISO1043-PBTGFFR(30+40) | |||
