产品展厅
产品展厅
技术参数
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 物理性能 | 密度 | ISO1183 | 1.73 | g/cm3 | |
| 表观密度 | 0.70到0.80 | g/cm3 | |||
| 溶化体积流率（MVR）(250°C/2.16kg) | ISO1133 | 3.50 | cm3/10min | ||
| 吸水率 | 饱和,23°C | ISO62 | 0.40 | % | |
| 平衡,23°C,50%RH | ISO62 | 0.20 | % | ||
| 粘数1 | ISO307 | 97.0 | cm3/g | ||
| 模具收缩性2 | free,longitudinal | 0.20 | % | ||
| free,transverse | 0.90 | % | |||
| 硬度 | 球压硬度(H961/30) | ISO2039-1 | 220 | MPa | |
| 机械性能 | 拉伸模量 | ISO527-2 | 16500 | MPa | |
| 拉伸应力(断裂) | ISO527-2 | 160 | MPa | ||
| 拉伸应变(断裂) | ISO527-2 | 1.7 | % | ||
| 弯曲模量 | ISO178 | 15000 | MPa | ||
| 冲击性能 | 简支梁缺口冲击强度(23°C) | ISO179/1eA | 11 | kJ/m2 | |
| 简支梁无缺口冲击强度 | -30°C | ISO179/1eU | 70 | kJ/m2 | |
| 23°C | ISO179/1eU | 60 | kJ/m2 | ||
| 热性能 | 0.45MPa,未退火 | ISO75-2/B | 220 | °C | |
| 1.8MPa,未退火 | ISO75-2/A | 215 | °C | ||
| 熔融温度 | ISO11357-3 | 223 | °C | ||
| 线形热膨胀系数-流动(23到80°C) | ISO11359-2 | 2.0E-5到3.0E-5 | cm/cm/°C | ||
| 比热 | 950 | J/kg/°C | |||
| 导热系数 | DIN52612 | 0.36 | W/m/K | ||
| 温度指数-at50%lossoftensilestrength | --3 | IEC60216 | 140 | °C | |
| --4 | IEC60216 | 160 | °C | ||
| 使用温度-shortcycleoperation | IEC60216 | 210 | °C | ||
| 电气性能 | 表面电阻率 | IEC60093 | 1.0E+13 | ohms | |
| 体积电阻率 | IEC60093 | 1.0E+16 | ohms·cm | ||
| 相对电容率 | 100Hz | IEC60250 | 4.00 | ||
| 1MHz | IEC60250 | 4.00 | |||
| 耗散因数 | 100Hz | IEC60250 | 1.2E-3 | ||
| 1MHz | IEC60250 | 0.015 | |||
| 漏电起痕指数 | 解决方案A | IEC60112 | 425 | V | |
| 解决方案B | IEC60112 | 125 | V | ||
| 可燃性 | 可燃性等级 | 0.400mm | IEC60695-11-10,-20 | HB | |
| 1.60mm | IEC60695-11-10,-20 | HB | |||
| FlammabilitybyElectricalSourcesofIgnition-MethodBH(4.00mm) | IEC60707 | BH2 | |||
| 可燃性等级 | 0.400mm | IEC60695-11-10,-20 | HB | ||
| 1.60mm | IEC60695-11-10,-20 | HB | |||
| FlammabilitybyElectricalSourcesofIgnition-MethodBH(4.00mm) | IEC60707 | BH2 | |||
| 补充信息 | AutomotiveMaterials(>1.00mm) | FMVSS302 | Passed | ||
