产品展厅
产品展厅
Information provided by EMS Grivory
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.77 g/cc | 0.0639 lb/in3 | ISO 1183 |
| 吸水率 | 3.2 % | 3.2 % | ISO 62 |
| 水分吸收 | 1.10 % | 1.10 % | ISO 62 |
| 线性成型收缩率,Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 |
| 线性成型收缩率，横向 | 0.0020 cm/cm | 0.0020 in/in | ISO 294-4, 2577 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 球压硬度 | 330 MPa | 47900 psi | conditioned; ISO 2039-1 |
| 345 MPa | 50000 psi | dry; ISO 2039-1 | |
| 抗张强度(断裂) | 280 MPa | 40600 psi | conditioned; ISO 527-1/-2 |
| 300 MPa | 43500 psi | dry; ISO 527-1/-2 | |
| 伸长率 (断裂) | 1.9 % | 1.9 % | dry; ISO 527-1/-2 |
| 1.9 % | 1.9 % | conditioned; ISO 527-1/-2 | |
| 拉伸模量 | 25.0 GPa | 3630 ksi | conditioned; ISO 527-1/-2 |
| 25.5 GPa | 3700 ksi | dry; ISO 527-1/-2 | |
| 简支梁无缺口冲击强度 | 7.00 J/cm2 | 33.3 ft-lb/in2 | conditioned; ISO 179/1eU |
| 7.50 J/cm2 | 35.7 ft-lb/in2 | dry; ISO 179/1eU | |
| 7.00 J/cm2 @Temperature 30.0 °C | 33.3 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |
| 7.00 J/cm2 @Temperature 30.0 °C | 33.3 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |
| 简支梁缺口冲击强度 | 1.50 J/cm2 | 7.14 ft-lb/in2 | dry; ISO 179/1eA |
| 1.50 J/cm2 | 7.14 ft-lb/in2 | conditioned; ISO 179/1eA | |
| 1.50 J/cm2 @Temperature 30.0 °C | 7.14 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |
| 1.50 J/cm2 @Temperature 30.0 °C | 7.14 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 体积电阻率 | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | dry; IEC 60093 |
| 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | conditioned; IEC 60093 | |
| 表面电阻 | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 |
| 介电强度 | 33.0 kV/mm | 838 kV/in | dry; IEC 60243-1 |
| 33.0 kV/mm | 838 kV/in | conditioned; IEC 60243-1 | |
| 相比耐漏电起痕指数(CTI) | 600 V | 600 V | conditioned; IEC 60112 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线形热膨胀系数 - 流动 | 15.0 μm/m-°C | 8.33 μin/in-°F | ISO 11359-1/-2 |
| 线性热膨胀系数,横向流动 | 50.0 μm/m-°C | 27.8 μin/in-°F | ISO 11359-1/-2 |
| 熔融温度 | 260 °C | 500 °F | 10°C/min; ISO 11357-1/-3 |
| 工作温度, Air | 100 - 120 °C | 212 - 248 °F | long term; EMS |
| 220 °C | 428 °F | short term; EMS | |
| 载荷下热变形温度(1.8 MPa) | 250 °C | 482 °F | ISO 75-1/-2 |
| 载荷下热变形温度(8.0 MPa) | 215 °C | 419 °F | ISO 75-1/-2 |
| 可燃性(UL94) | HB | HB | IEC 60695-11-10 |
| 材料描述 | 测试方法 | |
|---|---|---|
| 汽车 | Air intake sytems | |
| Automotive electr. and electronics, lighting | ||
| Cooling and climate control | ||
| Exterior | ||
| Interior | ||
| Powertrain and Chassis | ||
| 电器及电子产品 | Connectors | |
| Electrical appliances | ||
| Electrical equipment | ||
| Energy distribution | ||
| Mobile phones and other portable devices | ||
| 形式 | Granules | |
| 工业和消费品 | Housewares | |
| Hydraulics & Pneumatics | ||
| Mechanical Engineering | ||
| Power transmission | ||
| Sanitary, water and gas supply | ||
| Sports & Leisure | ||
| Tools & Accessories | ||
| 加工 | Injection Molding | |
| 产品属性 | Improved flowability and demoulding | |
| Partially aromatic Polyamide |
